Tag Archives: repair

How to Repair an Outdoor Water Faucet

Every homeowner will discover that they will need to have an outdoor water faucet, whether it be to water their lawn or wash their car; however, they are notorious for having problems from time-to-time. When people use a little bit of common sense, they will quickly realize that anything that has water running through it has the potential to freeze during the winter. For this reason, every year when it begins to get cold, news anchors will begin reminding people to unhook their hose and ensure that the faucet’s water supply is completely shut-off. The bad thing is that most people operate under the assumption that their faucet will not freeze, apparently because their faucet is different from everyone else’s. However, a frozen faucet is not the only thing that can malfunction with these units, so it is important for people to understand how to repair their outdoor water faucet, or they will have to pay a plumber to handle the task.

Analyze the Problem

The first step in repairing an outdoor faucet is to carefully analyze exactly what the problem is. Many people become stressed out when they know they have to repair something, which can lead them to make rushed decisions. The problem with this is that they may go buy a lot more expensive items than they actually need. Another potential problem with this is that they may purchase the wrong supplies and have to return them to the store, which will make the process take even longer. The worst case scenario would be when the hardware store will not even accept a returned product that has been opened, because the customer will be completely out of their money.

Parts Required

Depending on what the problem is, people may need to purchase a new spigot, pipe, shut-off valve. The spigot is essentially the pipe that people see the water coming out of. The pipe is hidden behind the actual faucet, so it may be a little tougher to work on. The shut-off valve is the knob that people rotate to turn the faucet off or on. People will simply need to find the right sized wrench to disconnect the faucet from the wall. They will see a nut towards the middle of the faucet that the wrench will connect with.

Once people discover what the problem is with their outdoor faucet, they can make repairs. No one should have to pay a plumber a substantial rate to complete such an easy task. People will find all of the efficient plumbing fixtures they need at a hardware store, and people will likely have all of the tools they need to make the necessary repairs.

If you do end up needing a plumber for more extensive repairs,  just call us!

K. L. Contractor Plumbing, Inc.
3304 High Noontide Way
Acworth, GA 30101
404-626-2440

Tips for Easier Water Heater Repair

When it comes to keeping your water heater in tip top shape, you really cannot go wrong with hiring a plumber. An emergency plumber has all the skills and training that are necessary to ensure that your device will be working as efficiently as possible. In addition to this, a plumbing contractor uses all the necessary equipment that will ensure a hundred percent effectiveness.

However, professional services can possibly take a chunk out of your budget, because emergency plumber services do not come cheap. Fortunately, there are certain things that you may do in order to minimize the fees and professional charges that you would have to pay in order to bring your water heater back to its former state.

By doing the basic and minor repairs by yourself, you minimize the tasks that a plumbing contractor would have to tend to; thus, minimizing the amount that you would have to pay him. Here are some tips that you may use in order to make the process of water heater repair much easier.Water heater repair Acworth GA

If your heater does not heat the water as much as you wish it would, for example, then you should definitely look into the over-all heating process that your device uses. There are certain things that may have caused this predicament, including bad water supply for example. Make sure that the right amount of water goes into your device, and that the same amount comes out of it. If there is even the most minor difference between both water levels, then there is a possibility that the smallest volume of water is leaking inside your device, thereby causing it to function less efficiently than it could. For gas water heaters you should also make sure that the heater’s pilot light is working well, in order for it to heat the water to the right temperature.

If your device is making strange noises, on the other hand, then it is most likely because some part of the water heater has become loose. Open the device and make sure that all individual parts are connected properly. It would also do you well if you take of all the parts and clean them before you place them all together again. This way, the water will be able to pass through the device without any problem.

If you notice that your water heater tank is leaking, then you should look into how the parts that are involved in the over-all water way are connected. Tighten the connections and you will most likely be able to get rid of the problem. Leaking may also be caused by overheating and overworking the device, so make sure that you only use the right settings when you use it and that you turn it off completely when it is not in use.

By tending to these problems by yourself, you exponentially decrease the amount of work that you plumbing contractor would have to put into the job. However, it is imperative that you still have a plumber do a once over before you use the heater again, in order to ensure that all the pieces are in their proper place.